Menu
Your Cart

COVID UPDATE 1ST APRIL 2020

PLEASE ALLOW ADDITIONAL TIME FOR DELIVERIES. COURIERS AND ROYAL MAIL HAVE REDUCED STAFFING ON SOME ROUTES

Maxx CNC Aluminium Hopup Chamber ME - SPORT

Maxx CNC Aluminium Hopup Chamber ME - SPORT
New

Product Description

CNC Aluminum Hopup Chamber ME Sport (with BB Catching System) unit is precisely made to improve accuracy and ensure consistent air seal for Tokyo Marui (include KRYTAC and KWA) M4/M16 Standard AEG series.

The Hopup Chamber ME unit has a precision rotary dial design for fine hopup adjustments, also re-engineered the hopup levers and concave nubs to work best with R-hop and Standard-Hop to keep the BBs shooting straight and accurate on every single shot.

The Hopup Chamber ME unit is designed to accept the nozzle length from 21.00mm to 21.25mm, and fully compatible with most aftermarket soft and hard rubber bucking without losing FPS or dropping BBs.

The Hopup Chamber ME Housing is equipped with a new CNC Delrin Locking C-Clip design to hold barrel tight without wobbling and twisting, and 3 compression springs on top, at bottom and in center of housing to ensure the hopup unit is exactly centered, straight and air tight at all times when adapted to any V2 gear boxes with 11mm or 11.5mm inner bore.

More than that, the Hopup Chamber ME Sport unit is specially designed with BB Catching System to prevent dropping BBs after removing the magazine.


***The Dual UV LED Boards and Module set and Single UV LED Board w/ Clear Cover and Module set are optional add-ons to glow BBs in the dark. Operating Voltage from 7VDC - 15VDC (2-4 cells LiPo, 6-13 cells NiCad). (Sold separately)

***The Empty Magazine Detection Sensor and Electronic Switch Controller are optional add-ons to stop Motor/HPA firing when the magazine is empty. (Sold separately)

***Test results: FPS might be increased from 10FPS to 30FPS over stock setup. Please check your FPS!


Includes

1 x CNC Aluminum Hopup Chamber ME Sport (with BB Catching System) unit

2 x Strong Clear Vinyl Cover set

1 x CNC Aluminum Standard-Hop Arm

1 x CNC Aluminum R-Hop Arm

1 x Silicone Rubber Standard-Hop Nub Damper

1 x Silicone Rubber R-Hop Nub Damper

1 x CNC Aluminum 4.5mm length Precision R-Hop Concave Nub

1 x CNC Aluminum 6mm length Precision R-Hop Concave Nub

1 x CNC Brass Threaded Slot Pin

1 x CNC Delrin Locking C-Clip

1 x CNC Barrel Brass Spacer

1 x Brass Spacer Holder Oring

3 x Steel Compression Spring

 


  Specification

Overall Length: 51mm

Overall Height: 37.75mm

Hub Outer Diameter (to fit into Gear Box): min 11mm - max 11.5mm

Hub Outer Diameter (to fit into Outer Barrel): min 12mm

Hub Inner Diameter (to fit Nozzle): max 8.3mm

Feeder Outer Diameter (to fit magazine): min 9.25mm

Feeder Length (to fit magazine): max 6.25mm

Material: Aluminum 6061

 


  Features

Machined from a solid aircraft aluminum block with tight tolerances to provide better accuracy, consistency, and durability

Improved accuracy and ensure consistent air seal for Tokyo Marui (include KRYTAC and KWA) M4/M16 Standard AEG series

Precision rotary dial design for fine hopup adjustments

Re-engineered the hopup levers and concave nubs to work best with R-hop and Standard-Hop to keep the BBs shooting straight and accurate on every single shot

Removable Brass Threaded Slot Pin for setup and maintenance

Accepted the nozzle length from 21.00mm to 21.25mm

Fully compatible with most aftermarket soft and hard rubber bucking without losing FPS or dropping BBs

Equipped with a new CNC Delrin Locking C-Clip design to hold barrel tight without wobbling and twisting

Equipped with 3 compression springs on top, at bottom and in center of housing to ensure the hopup unit is exactly centered, straight and air tight

Compatible with any V2 gear boxes with 11mm or 11.5mm bore

Specially designed with BB Catching System to prevent dropping BBs after removing the magazine

The Dual UV LED Boards and Module set and Single UV LED Board w/ Clear Cover and Module set to glow BBs in the dark ready!

The Empty Magazine Detection Sensor to stop Motor/HPA firing ready!

 


  Weight

N/A grams

 


  Usage

Compatible with most Tokyo Marui (include KRYTAC and KWA) M4/M16 standard AEG version 2 gear box

 


  Requires

Wearing eye protection is recommended

Use proper tools for disassembly and reassembly the gear box with great care due to spring tension

Bearing lubricant oil/grease is recommended for smooth operation

 


  Instruction

Instruction Manuals are included

Tokyo Marui® is a registered trademark of Tokyo Marui Co., Ltd.

KRYTAC® is a registered trademark of KRISS Systems SA in the U.S. and other countries.

KWA® is a registered trademark of KWA Performance Industries, Inc.

Write a review

Note: HTML is not translated!
Bad Good